SUNCHI 1000mW DIY Laser Printer Engraving Machine Mini Art Craft Custom Logo Engraver
- No base, so get rid of the size and appearance of the engraving object, 360 degrees can be engraved at any angle to enhance DIY practicality
- The engraving range is increased to 8CM* 8CM, which is 4 times more than the 3.8 CM*3.8 CM.
- Dragging the image can move the engraving position, which is more convenient and accurate than the button operation.
- Self-contained protective lens, no glasses required
Support PC system:Win XP/7/8/10.
Max. Engraving Area: 3.1X3.1inch(80*80mm)
Max. working range:3.94*2.36inch(W*H)
Product Size: 5.5*5.5*8.3inch(14*14**21cm)
Engravable materials: Wood, Bamboo, Paper, Leather, Rubber,Soft Plastic or other flammable organic matter
Non-engravable materials: metal, glass, crystal ,ceramic, hard plastic, or other high temperature resistant materials
1: make sure your computer is WIN system.
2: The USB port is connected to the computer successfully.
3: Carving the focal length of the different object is different, need to adjust the focal length of the laser.
4: if can't print full image, It is because the rails are stuck, You need to slide laser and sliding table manually to the origin.
1.Please read the user manual carefully before operating the machine.you`d better try a few times with the example wood piece
2.The product is a DIY laser carving machine for home use, a tool machine, can not be compared with laser carving machine for industrial use.
3.Do not use the laser head to point at human or his eyes.
4.Laser has power.skin exposure to laser is strictly prohibited.
5.The caving machine should not be stopped while working，it will cause a damage.
6..Do not fall or make any collision to the product.
7.You might need to temporarily shut down the antivirus software before
downloading the software. Otherwise some files in the software would be mistaken for virus and deleted by antivirus software.
8.Take a break after 20 minutes of working, it can not work continuously for a long time.
9.check the print size (Carving area: 80x80mm) ,cannot carve larger picture
1 x Laser engraver
1 x USB disk
1 x Screw driver
4 x Screws
4 x Screw caps
1 x Power cord
1 x USB cable
2 x Wood
1 x Manual
Package Dimensions: 10.8 x 7.6 x 7.4 inches